TP Equipment
Equipment available at TP
Contact: Teow Yiwei, 6780 4263, Email: teow_yiwei@tp.edu.sg
List of Equipment
Equipment | Description | Dept | Keywords |
|---|---|---|---|
HPTLC | The system includes Lindomat, plate heater and visualizer. This is a chromatography technique used to separate non-volatile mixtures. | School of Applied Science | HPTLC |
HPLC System with DAD and RI Detector | Qualitative and quantitative analysis of aqueous and organic samples | School of Engineering | HPLC System with DAD and RI Detector |
Shimadzu QP-2010 Plus Gas Chromatograph - Mass Spectrometer | Separating and analysing volatile molecules | School of Applied Science | Shimadzu QP-2010 Plus Gas Chromatograph - Mass Spectrometer |
Gas Chromatography with Flame Ionization Detector and Auto-Injector | Separating and analysing volatile molecules | School of Applied Science | Gas Chromatography with Flame Ionization Detector and Auto-Injector |
High Performance Liquid Chromatography (HPLC) | Separating and analysing non-volatile molecules | School of Applied Science | High Performance Liquid Chromatography (HPLC) |
Atomic Absorption Spectrometer | Analysis of metal concentrations | School of Applied Science | Atomic Absorption Spectrometer |
FTIR IR Shimadzu Prestige-21 NIR System With AIM8800 Upgrade Kit | For obtaining an infrared spectrum of absorption or emission of a solid, liquid or gas | School of Applied Science | FTIR IR Shimadzu Prestige-21 NIR System With AIM8800 Upgrade Kit |
Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) Optima 7000DV w Cross Flow Sample Introduction System | Analysis of trace metals | School of Applied Science | Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) Optima 7000DV w Cross Flow Sample Introduction System |
TG-DTA/DSC Analyzer Labsys EVO | METALLURGICAL INSPECTION MICROSCOPE is a high power microscope (5x – 100x) are used for metallurgical inspection including metals, ceramics and other labs materials. It can be used to examine delimitations, cracks and other anomalies non-destructively. | School of Engineering | TG-DTA/DSC Analyzer Labsys EVO |
Microscope - Metallurgical Inspection | Quantitative analysis of aqueous samples | School of Engineering | Microscope - Metallurgical Inspection |
Invitrogen Transfection System | Electroporation device for transfection of primary cells, stem cells and difficult-to-transfect cells. | School of Applied Science | Invitrogen Transfection System |
Olympus Cell Counter | Automated cell counter for cell counting process | School of Applied Science | Olympus Cell Counter |
Olympus BX53 Upright Fluorescence Microscope | An upright microscope for microscopic analysis for cellular tissue observation. Able to take pictures & videos. | School of Applied Science | Olympus BX53 Upright Fluorescence Microscope |
Isoelectric focusing gel electrophoresis | Protein analysis | School of Engineering | Isoelectric focusing gel electrophoresis |
PCR Machine | Block PCR, Gradient PCR | School of Applied Science | PCR Machine |
Real time PCR | Real time PCRÂ | School of Applied Science | Real time PCR |
Tecan Plate Reader | 96 well plate reader for ELISA application | School of Applied Science | Tecan Plate Reader |
Biodot Liquid handling station | Microliter liquid dispensing machine | School of Applied Science | Biodot Liquid handling station |
Metal 3D Printer | Building volume of 250 x 250 x 325 mm | School of Engineering | Metal 3D Printer |
Metal 3D Printer | To print 3D metal parts/components. Build volume 100mm diameter x 80mm height | School of Informatics & IT | Metal 3D Printer |
Prototyping - 3D Printing Machine (Flashforge Creator Pro) | Produces 3D model | IIT | Prototyping - 3D Printing Machine (Flashforge Creator Pro) |
Additive - 3D Printing Machine (EDEN 260V) | Produces 3D model by depositing material layer by layer | School of Engineering | Additive - 3D Printing Machine (EDEN 260V) |
Subtractive -Â Rapid Prototyping Machine with T-Slot Table Etc Roland MDX-540A | Produces 3D model by removal technique using cutting tools. | School of Engineering | Subtractive -Â Rapid Prototyping Machine with T-Slot Table Etc Roland MDX-540A |
Ultra High Vacuum Multifunctional Magnetron Sputtering System | This system is used to deposit thin metal or insulator film on substrate in micro fabrication process. Sputtering is the process whereby atoms are ejected from a target material to be deposited on a substrate as a result of the bombardment of the target by high energy particles like Ar ions. Application: | School of Engineering | Ultra High Vacuum Multifunctional Magnetron Sputtering System |
Diode Pumped Solid State 355nm UV Laser Processing System | This 355nm UV laser system is used to dice GaN, Silicon or any other wafer. The principle is the high intensity laser interacts with the substrate material and the resulted plasma evaporating the substrate material. As there are no blades or mechanical contact involved with laser processing, chips and cracks associated with mechanical processing are avoided. Application: | School of Engineering | Diode Pumped Solid State 355nm UV Laser Processing System |
E-beam evaporator | Electron Beam is a form of physical vapor deposition in which a target anode is bombarded with an electron beam given off by a charged tungsten filament under high vacuum. The electron beam causes atoms from the target to transform into the gaseous phase. These atoms then precipitate into solid form, coating everything in the vacuum chamber (within line of sight) with a thin layer of the anode material Application: | School of Engineering | E-beam evaporator |
Scanning Electron Microscope | A SEM is a type of electron microscope that produces images of a sample by scanning it with a focused beam of electrons. The most common SEM mode is detection of secondary electrons emitted by atoms excited by the electron beam which contain information about the sample's surface topography and composition. Application: | School of Engineering | Scanning Electron Microscope |
Atomic Force Microscope | Atomic Force Microscopy (AFM), provides images with atomic or near-atomic-resolution surface topography, capable of quantifying surface roughness of samples down to the angstrom-scale. In addition to presenting a surface image, AFM can also provide quantitative measurements of feature sizes, such as step heights and other dimensions. | School of Engineering | Atomic Force Microscope |
Microscope - Fluorescent | FLUORESCENT MICROSCOPE is used to study specimens, which can be made to fluoresce. The fluorescence microscope is based on the phenomenon that certain material emits energy detectable as visible light when irradiated with the light of a specific wavelength. | School of Engineering | Microscope - Fluorescent |
Ceramic Kiln | To fire clay. Bisque Firing between 650- 950 degrees Celsius and glaze firing from 1000 to 1250 degrees Celsius | School of Design | Ceramic Kiln |
Dry Sandblasting Machine | Sandblasting is the process of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface, or remove surface contaminants like paint or rust. | School of Design | Dry Sandblasting Machine |
Sanding Machine (Disc & Bobbin) | The disc sander is a stationary machine that consists of a replaceable circular shaped sandpaper attached to a wheel turned by an electric motor. The work piece is sat on a front bench that can be adjusted to various angles. | School of Design | Sanding Machine (Disc & Bobbin) |
CO2 Laser Cutting System | Laser cutting is a technology that uses a laser to cut vectors on materials like wood, plastics, paper. A drawing can be generated and send to the machine to do intricate and fine cutting. | School of Design | CO2 Laser Cutting System |
Textile Plotter / Printer | For printing patterns and design directly onto fabric | School of Design | Textile Plotter / Printer |
CO2 Laser Engraving System | Laser engraving is a technology that uses a laser to cut/engrave vector and raster on materials like wood, plastics, paper. A drawing can be generated and send to the machine to do intricate and fine cutting. | School of Design | CO2 Laser Engraving System |